Engineering Transactions, 64, 4, pp. 547–553, 2016
10.24423/engtrans.705.2016

A Numerical Investigation of the Influence of the Material Microstructure on the Failure Mode of Metal Ceramic Composites

Pitchai PANDI
Politecnico di Milano
Italy

Gabriella BOLZON
Politecnico di Milano
Italy

Metal failure is often initiated by strain localization in narrow bands. In metal matrix composites, the occurrence and the consequences of this phenomenon are influenced by the material microstructure. This dependency has been numerically investigated by considering periodic and quasi-periodic arrangement of ceramic fibers in a metal matrix, with reinforcement content varying between 10% and 50% in volume. The constitutive response of the metal has been simulated by the widely used GTN (Gurson-Tvergaard-Needleman) continuum damage-plasticity model with evolution law based on local porosity. The onset of failure for the composite has been identified with the critical growth of micro voids that induce softening at the macro scale. An extensive study has been performed in order to distinguish the effects of the material microstructure, the role of the imperfections and the influence of the simulation details. The main results of this investigation are summarized in this paper.
Keywords: metal ceramic composites; numerical simulation; failure analysis
Full Text: PDF
Copyright © Polish Academy of Sciences & Institute of Fundamental Technological Research (IPPT PAN).

References

Kaczmar J.W., Pietrzak K., Włosiński, W., The production and application of metal matrix composite materials, Journal of Materials Processing Technology, 106(1–3): 58–67, 2000, doi: 10.1016/S0924-0136(00)00639-7.

Evans A., San Marchi C., Mortensen A., Metal Matrix Composites in Industry: An Introduction and a Survey, Springer Science, New York, 2003.

Fan S., Zhang L., Xu Y., Cheng L., Tian G., Ke S., Xu F., Liu H., Microstructure and tribological properties of advanced carbon/silicon carbide aircraft brake materials, Composites Science and Technology, 68(14): 3002–3009, 2008, doi: 10.1016/j.compscitech.2008.06.013.

Qu X.-H., Zhang L., Wu M., Ren S.-B., Review of metal matrix composites with high thermal conductivity for thermal management application, Progress in Natural Science: Materials International, 21(3): 189–197, 2011, doi: 10.1016/S1002-0071(12)60029-X.

Macke A.J., Schultz B.F., Rohatgi P.K., Metal matrix composites offer the automotive industry an opportunity to reduce vehicle weight, improve performance, Advanced Materials & Processes, 170(3): 19–23, 2012.

Babout L., Maire E., Buffière J.Y., Fougères R., Characterization by X-ray computed tomography of decohesion, porosity growth and coalescence in model metal matrix composites, Acta Materialia, 49(11): 2055–2063, 2001, doi: 10.1016/S1359-6454(01)00104-5.

Gurson A.L., Continuum theory of ductile rupture by void nucleation and growth: Part I – Yield criteria and flow rules for porous ductile media, ASME Journal of Engineering Materials and Technology, 99(1): 2–15, 1977, doi: 10.1115/1.3443401.

Tvergaard V., On localization in ductile materials containing spherical voids, International Journal of Fracture, 18(4): 237–252, 1982, doi:10.1007/BF00015686.

Needleman A., Tvergaard V., Analysis of ductile rupture in notched bars, Journal of the Mechanics and Physics of Solids, 32(6): 461–490, 1984, doi: 10.1016/0022-5096(84)90031-0.

Lievers W.B., Pilkey A.K., Lloyd D.J., Using incremental forming to calibrate a void nucleation model for automotive aluminum sheet alloys, Acta Materialia, 52(10): 3001–3007, 2004, doi: 10.1016/j.actamat.2004.03.002.

He M., Li F., Wang, Z., Forming limit stress diagram prediction of aluminum alloy 5052 based on GTN model parameters determined by in situ tensile test, Chinese Journal of Aeronautics, 24(3): 378–386, 2011, doi: 0.1016/S1000-9361(11)60045-9.

Abaqus/Explicit, release 6.13-1, Dassault Systems Simulia Corp, Providence, RI, USA, 2013.

Michel J.C., Moulinec H., Suquet P., Effective properties of composite materials with periodic microstructure: a computational approach, Computer Methods in Applied Mechanics and Engineering, 172: 109–143, 1999.




DOI: 10.24423/engtrans.705.2016