Dynamika Powłok Lepkoplastycznych
The method of linearization of the constitutive equations based upon the non-associated flow law makes it possible to determine the time-dependent profile of the shell deflection and to establish the final shape of the deformed structure. The method of estimation, on the other hand, allows for a quick determination of the maximum deflection and the response time of the structure. Both methods are illustrated by examples of solutions of a number of boundary value problems for plates and shells. The accuracy of the solutions derived is determined by comparison with the experimental data.
References
E. A. APPLEBY, W. PRAGER, A problem in viscoplasticity, J. Appl. Mech., 29, 2, 381-384, 1962.
J. BEIDA, Propagation of two-dimensional stress -waves in elastic viscoplastic material, Proc. 12-th International Congress of Applied Mechanics, Ed. M. Heteney, Berlin, Springer 1969.
J. BEJDA, Propagation of plane and axially symmetric two-dimensional elastic-viscoplastic waves, Revue Roumaine des Sciences Tech., 15, 2, 1970.
J. BEIDA, A solution of the wave problem for elastic/visco-plastic beams, J. Mechanique, 6, 2, 263-282, 1967.
L. D. BERTHOLF, C. H. KARNES, Axisymmetric elastic-plastic wave propagation 6061-T6 aluminium bars of finite length, J. Appl. Mech., 36, 3, 1969.
S. R. BODNER, P. S. SYMONDS, Experimental and theoretical investigation of the plastic deformation of cantilever beams subjected to impulsive loading, J. Appl. Mech., 29, 4, 719-728, 1962,
G. I. BYKOWCEW, T. D. SEMYKINA, O lepkoplastycznym płynięciu płyt kołowych i powłok obrotowo symetrycznych, Izw. AN SSSR, 4, 68-76, 1964.
C. R. CALLEDINE, Simple ideas ni the large-deflection plastic theory of plates and slabs, Engineering Plasticity, Ed. J. Heyman, F. A. Leckie, Cambridge University Press 1968.
R. J. CLIFTON, A difference method for plane problems in dynamic elasticity, Quart. Appl. Math., 25, 1, 1967.
B. D. COLEMAN, W. NOLL, The thermodynamics of elastic materials with heat conduction and viscosity, Arch. Rat. Mech. Anal., 13, 167-178, 1963.
N. CRISTESCU, Dynamic Plasticity, North Holland Publ. Comp., Amsterdam 1967.
D. C. DRUCKER, A definition of stable inelastic materials, J. Appl. Mech., 26, 1, 101, 1959.
T. A. DUFFY, S. W. KEY, Experimental-theoretical correlation of impulsively loaded clamped circular plate, Exp. Mech., 9, 6, 241-249, 1969.
M. K. DUSZEK, Plastic analysis of cylindrical shells subjected to large deflections, Arch. Mech., 18, 5, 599-614, 1966.
M. K. DUSZEK, Plastic analysis of shallow spherical shells at moderately large deflections, Proc. IDTAM Symposium, Copenhagen 1967, Ed. F. Niordson, Springer 1969.
M. K. DUSZEK, Równania teorii dużych ugięć powłok plastycznych, Prace IPPT 13/1971.
G. EASON, Velocity fields for circular plates with the von Mises yield condition, J. Mech. Phys. Solids, 6, 231-235, 1958.
A. L. FLORENCE, Circular plate under a uniformly distributed impulse, Jnt. J. Solids Structures, 1, 2, 37-47, 1966,
A. L. FLORENCE, Annular plate under a transverse line impulse, AIAA Journal, 3, 9, 1726-1732, 1965.
A. L. FLORENCE, Buckling of visco-plastic cylindrical shells due to impulsive loading, AIAA Journal, 6, 532-537, 1968.
H. D. HIBBIT, P. V. MARCAL, J. R. RICE, A finite element formulation for problems of large strain and large displacement, Int. J. Solids Structures, 6, 8, 1069-1086, 1970.
J. B. HADDOW, A linearized theory of visco-plasticity, Int. J. Solids Structures, 3, 4, 533-542, 1967.
P. G. HODGE, The influence of blast characteristics on the final deformation of circular cylindrical shells, J. Appl. Mech., 23, 617-624, 1956,
P. G. HODGE, The Mises yield condition for rotationally symmetric shells, Quart. Appl. Math., 18, 305-311, 1961.
K. HOHENEMSER, W. PRAGER, Uber die Ansatze der Mechanik isotroper Kontinua, ZAMM, 12, 216, 1932,
H. G. HOPKINS, On the plastic theory of plates, Proc. Roy. Soc. London, A 241, 153-179, 1957.
Impact and Slamming, Report of Commitee 8, 4-th Int. Ship Structures Congress, Tokyo 1970.
N. JONES, The influence of large deflections on the behavioure of rigid-plastic cylindrical shells loaded impulsively, J. Appl. Mech., 37, 2, 416-425, 1970.
N. JONES, Finite deflections of a rigid viscoplastic strainhardening annular plate loaded impulsively, J. Appl. Mech., 35, 2, 349-356, 1968.
N. JONES, Finite deflections of a simply supported rigid-plastic annular plate loaded dynamically, Int. J. Solids Structures, 4, 6, 593-603, 1968.
N. JONES, Impulsive loading of a simply supported circular rigid-plastic plate, J. Appl. Mech., 35, 1, 59-65, 1968.
JOW-AN HSI, Some studies in the dynamic plastic deformation of plates and shells, Ph. D. Thesis, University of Waterloo, September 1967.
J. M. KELLY, T. WIERZBICKI, Motion of a circular viscoplastic plate subject to projectile impact, ZAMP, 18, 2, 236-246, 1967.
J. M. KELLY, T. R. WILSHAW, A theoretical and experimental study of projectile impact on clamped circular plates, Proc. Roy. Soc. London, A 306 435-447, 1068.
J. M. KELLY, Non-linear constitutive relations for plane shock propagation in viscoplastic solids, Arch. Mech., 22, l,_93-110, 1970.
R. H. LANCE, E. T. ONAT, A comparison of experiments and theory in the plastic bending of circular plates, J. Mech. Phys. Solids, 10,301, 1962.
R. H. LANCE, J. F. SOECHTING, A displacement hounding principle in finite placidity, lnt. J. Solids Structures, 6, 8, 1103-lll8 1970.,
J. W. LEECH, E. A. WITMER, T. H. H. PIAN, Numerical calculation technique for large elasticplastic transient deformations o thin shells, AIAA Journal, 6, 12, 2352-2359, 1968.
Ju. R. LEPIK, Dynamika kołowych i pierścieniowych płyt z materiału sztywno-plastycznego wrażliwego na prędkość odkształcenia, Prildadlla Miechanika, 5, 1, 60-66, 1969.
U. S. LINDHOLM, Dynamic deformation of metals, Colloquium on Behaviour of Metals under Dynamic Loading, Chicago 1965.
P. M. NAGHDI, S. A. MURCH, On the mechanical behaviour of viscoelastic/plastic solids, J. Appl. Mech., 30, 321-328, 1963.
J. B. MARTIN, lmpulsive loading theorems for rigid-plastic continua, J. Eng. Mech. Div., Proc. ASCE, 90, 107-132, 1964.
J. B. MARTIN, A displacement bound technique for elastic continua subjected to a certain class of dynamic loading, J. Mech. Phys. Solids, 12, 165-176, 1964.
J.B. MARTIN, A displacement bound technique for inelastic continua, subjected to certain class of dynamic loading, J. Appl. Mech., 32, 1-6, 1965.
J. B. MARTIN, Time and displacement bound theorems for viscous and rigid-visco-plastic continua subjected to impulsive loading, Proc. 3rd Southeastern Conf., Columbia 1966.
T. S. MENTEL, The plastic deformation due to impact of a cantilever beam with an attached tip mass, J. Appl. Mech., 25, 515-524, 1958.
Z. MRÓZ, On forms of constitutive laws for elastic-plastic solids, Arch. Mech., 18, 3-35, 1966.
S. MURAKAMI, J. BEJDA, Two-dimensional cylindrical problems of elastic/viscoplastic wave propagation, Arch. Mech., 23, 2, 199-211, 1971.
L. V. NIKITIN, Transverse elastic/visco-plastic wave propagation in beams and plates, Inż. Sbornik, 30, 32-46, 1960.
L. NOWIŃSKI, Large amplitude oscilation of triangular plates, J. Franklin Inst., 273, 1965.
E. T. ONAT, R. M. HAYTHORNTHWAITE, The load carrying capacity of circular plates at large deflection, J. Appl. Mech., 23, 49-55, 1956.
A. PABIANEK, Constitutive equations for viscoplastic rotationally symmetric shells with HuberMises yield condition, Arch. Mech., 21, 6, 827-836, 1969.
A. PADIANEK, Lepkoplastyczne płynięcie powłoki walcowej przy warunku plastyczności HuberaMisesa, Rozpr. Inż., 18, 2, 1971.
A. PABIANEK, Dynamic loading of rigid-viscoplastic cylindrical shell, Arch, Mech., 21, 2, 199-211, 1969.
E. W. PARKES, The permanent deformation of a cantilever struck transversely at its tip, Proc. Roy. Soc. London, A 288, 462-476, 1955.
N. PERRONE, A mathematically tractable model of strain-hardening rate sensitivity plastic flow, J. Appl. Mech., 31, 1, 210-211, 1960.
N. PERRONE, Impulsively loaded strain-rate sensitive plates, J. Appl. Mech., 34, 2, 380-384, 1967.
P. PERZYNA, The constitutive equations for rate sensitive plastic materials, Quart. Appl. Math., 20, 321-332, 1963.
P. PERZYNA, The constitutive equations for work-hardening and rate sensitive plastic materials, Proc. Vibr. Probl., 4, 281-290, 1963.
P. PERZYNA, On physical foundations of viscoplasticity, 12-th Int. Congr. Appl. Mech., Stanford 1968.
P. PERZYNA, Thermodynamic theory of viscoplasticity, Advances in Applied Mechanics, 12, 1971.
P. PERZYNA, Thermodynamics of rheological materials with internal changes, J. Mecanique, 10, 1971.
P. PERZYNA, W. WOJNO, Thermodynamics of a rate sensitive plastic material, Arch. Mech., 20, 499-5ll, 1968.
W. PRAGER, Linearization in viscoplasticity, Oster. Ing. Arch., 15, 1-4, 152-157, 1961.
R. D. RICHTMYER, Difference methods for initial value problems, Interscience Publ., London 1957.
A. SAWCZUK, On formulation of large deflection theory for perfectly plastic shells, Proc. Natl. Bulgarian Conf. Appl. Mech., Varna 1969.
A. SAWCZUK, M. K. DUSZEK, O związkach podstawowych teorii powłok plastycznych, Rozpr. Inż., 18, 4, 1970.
A. SAWCZUK, M. K. DUSZEK, A note on the interaction of shear and bending in plastic plates, Arch. Mech., 15, 411, 1963.
A. SAWCZUK, P. G. HODGE, Comparison of yield conditions for circular cylindrical shells, J. Franklin Inst., 269, 5, 362-374, 1960.
J. A. SEILER, B. A. COTTER, P. S. SYMONDS, Impulsive loading of elastic-plastic beams, J. Appl. Mech., 23, 4, 515-521, 1956.
Slaming of Ships, a Critical Review of the Current State of Knowledge, Ship Structure Committee, 1970.
B. STORAKERS, On finite deformation and failure of nonlineary viscoplastic structures, Ph.D. Thesis, Royal Technical University Stockholm, 1969.
P. S. SYMONDS, Survey of methods of analysis for plastic deformations of structures under dynamic loading, Brown University Report 1-67, June 1967.
G. S. SZAPIRO, Uderzenie w sztywno-plastyczną płytę pierścieniową, PMM, 23, 1, 234-241, 1959.
Teoria Plastyczności, praca zbiorowa pod redakcją W. Olszaka, P. Perzyny i A. Sawczuka, PWN, Warszawa 1965.
T. C. T. TING, P. S. SYMONDS, Longitudinal impact on viscoplastic rods-linear stress-strain rate law, J. Appl. Mech., 31, 199-20_7, 1964.
C. TRUESDELL, W. NOLL, The non-linear field theories of mechanics, Encyclopedia of Physics III/3, Berlin 1965, Springer.
A. J. WANG, The permanent deflection of a plastic plate under blast loading, J. Appl. Mech., 22, 375-376. 1955.
A. J. WANG, H. G. HOPKINS, On the plastic deformation of builtin circular plate under impulsive loading, J. Mech. Phys. Solids, 3, 22-37, 1954.
T. WIERZBICKI, Bending of rigid-viscoplastic circular plates, Arch. Mech., 16, 5, 1964.
T. WIERZBICKI, Dynamics of rigid-viscoplastic circular plates, Arch. Mech., 17, 851, 1965.
T. WIERZBICKI, Response of rigid-viscoplastic circular and square plates to dynamic loading, Techn. Report No 162, Stanford University 1966.
T. WIERZBICKI, Impulsive loading of rigid-viscoplastic plates, Int. J. Solids Structures, 3, 635-647, 1967.
T. WIERZBICKI, On the bending-shear interaction in viscoplastic flow of circular plates, Biul. PAN, 17, 3, 153-159, 1969.
T. WIERZBICKI, A method of approximate solution of boundary value problems for rigid viscoplastic structures, Acta Mechanica, 3, l, 56-66, 1976.
T. WIERZBICKI, Non-associated constitutive law in viscoplasticity with application to dynamics of plates and shells, Acta Mechanika, 11, l, 1971.
T. WIERZBICKI, Large deflections of strain rate sensitive plate loaded impulsively, Arch. Mech., 21, 1, 67-79, 1969.
T. WIERZBICKI, On the region of admissible deformations in impulsive loading problems, J. Mech. Phys. Solids, 19, 6, 1970.
T. WIERZBICKI, Bounds on large dynamic deformations of structures, J. Eng. Mech. Div., Proc. ASCE, 96, 267-276, 1970.
T. WIERZBICKI, Viscoplastic flow of rotationally symmetric shells with particular application to dynamic loading, Prace IPPT J/1968.
T. WIERZBICKI, J. M. KELLY, Finite deflection of a circular viscoplastie plate subject to projectile impact, Int. J. Solids Structures, 4, 1081-1092, 1968.
T. WIERZBICKI, A theoretical and experimental investigation of impulsively loaded clamped circular viscoplastic plates, Int. J. Solids Structures, 6, 553-568, 1970.
T. WIERZBICKI, H. ANDRZEJEWSKI, An experimental and theoretical study of impulsively loaded viscoplastic cylindrical shells, Prace IPPT 11/1969.
M. L. WILKINS, Finite difference scheme for calculating problems in two space dimensions and time, J. Comp. Physics, 5, 1970.
M. L. WILKINS, Calculation of elastic-plastic flow, Methods in Computational Physics, vol. 3, Academic Press 1964.
E. A. WITMER, H. A. BALMER, J. W. LEECH, T. H. H. PIAN, Large dynamic deformations of beams, circular rings, circular plates and shells, 1, 8, 1848-1857, 1963.
E. A. WITMER, E. N. CLARK, H. A. BALMER, Experimental and theoretical studies of explosive induced large dynamic and permanent deformations of simple structures, Exp. Mech., 7, 2, 56-66, 1967.
W. WOJEWÓDZKI, Dynamic buckling of a visco-plastic cylindrical shell subjected to axial impact, Arch. Mech., 23, I, 73-92, 1971.
A. SAWCZUK, Large deflections of rigid-plastic plates, Proc. 11-th Int. Congress of Appl. Mech., Munich 1964.
J. B. MARTIN, S. P. SYMONDS, Mode approximations for impulsively loaded rigid-plastic structures, J. Eng. Mech. Division, Proc. ASCE, 92, No EMS, 4366, 1966.
P. PERZYNA, Teoria Lepkosprężystości, PWN Warszawa 1966.