Search

Search Results

• Material Nonlinear Analysis of Plane Structures Made of Cement Based Composite Materials Using the ANSYS System

  J. Pencik

  71–90
• Frequency-Based Crack Effect Study on Beams Under Free Vibration Using Finite Element Analysis

  Ompriya SAHU, Priyadarshi DAS, Manoj Kumar MUNI, Nibedita PRADHAN, Bidyadhar BASA, Shishir Kumar SAHU

  2024-01-31

  95–114
• Numerical and Experimental Analysis of Tuning Three Selected Types of Acoustic Helicoidal Resonators with 90-Degree Duct Elbow

  Wojciech ŁAPKA

  2025-12-02
• Numeryczne Modelowanie Procesów Fizycznych

  J.R.M. Radok

  1961-03-30

  5-18
• Influence of Failure Strain of Different Aluminium Alloys on Dynamic Problems

  Marcos RODRIGUEZ-MILL´AN, Alvaro VAZ-ROMERO, Jose Antonio RODRIGUEZ-MARTINEZ, Alexis RUSINEK, Angel ARIAS

  345–353
• Failure Analysis (Experimental and Numerical Approach) of Gas Turbine Generator Cooling Fan in Comparison between using 2types (14° and 19° Angle of Attack) of Blades

  Ali JAHANGIRI, Seyed Ebrahim Moussavi TORSHIZI, Seyed Majid Yadavar NIKRAVESH

  99–117
• Stability of the Cylindrical Panel. Experimental Investigations and Numerical Analysis

  J. Marcinowski, D. Antoniak

  1994-07-01

  61-74
• Numerical Analysis of the Factors Affecting the Anti-Slide Pile Design

  Yi TANG, Qiang XIE, Wenjin GOU, Renfeng WAN, Liang LI

  2017-06-26

  335–350
• Contact Between 3D Beams with Deformable Circular Cross-Sections – Numerical Verification

  Olga KAWA, Przemyslaw LITEWKA, Robert STUDZIŃSKI

  2018-08-27

  281–299
• Theoretical and Numerical Study of the Flexural Behaviour of BFRP RC Beams

  Dawid PAWŁOWSKI, Maciej SZUMIGAŁA

  2016-02-24

  213–223
• Computer Aided Modelling of Human Pelvic Bone

  A. John, P. Orantek

  215–226
• FEM analysis in the hip joint reconstructed with classical and modified hip resurfacing

  Anna Maria RYNIEWICZ, Tomasz MADEJ

  2017-03-20

  123–131
• Ultimate Load and Postfailure Behaviour of Box-Section Beams Under Pure Bending

  M. Kotełko

  1996-07-31

  229-251
• Analysis of Euler-Bernoulli Beams with Arbitrary Boundary Conditions on Winkler Foundation Using a B-Spline Collocation Method

  Amin GHANNADIASL, Mohsen Zare GOLMOGANY

  2017-08-03

  423–445
• Stress Analysis in Structural Components of the Koepe Pulley in Hoisting Installations

  Stanisław WOLNY, Sławomir BADURA

  155–170
• Fe Analysis on the Formation of Plastic Instabilities in Dynamically Expanded Copper Rings

  C. VELA, J. A. RODRIGUEZ–MARTINEZ, Alexis RUSINEK

  211–233
• Three-Dimensional Analysis of Laminated Plates with Functionally Graded Layers by Two-Dimensional Numerical Model

  Piotr PLUCIŃSKI, Jan JAŚKOWIEC

  2020-01-02

  21–45
• Finite Element Analysis of Elastic-plastic Plane Stress Problem

  I. Winnicki, M. Kleiber, M. Kwieciński

  1975-12-30

  609-624
• Numerical Simulation of Deflection and Stability of the Wooden Transmission Tower of Gliwice Radiostation

  Błażej WOJACZEK, Andrzej KATUNIN, Janusz BROL, Katarzyna ADAMCZYK

  2018-06-11

  229–247
• Engineering Safety Analysis via Destructive Numerical Experiments

  E. Haug

  1981-03-30

  39-50
• Analysis of a Variable Geometry Radial Inflow Turbine Using 1D Mean-line Model

  Dmytro SAMOILENKO

  2025-09-24

  463–483
• Badanie Wyboczenia przy Pełzaniu Płyt Kołowych w Zakresie Małych i Dużych Ugięć

  Z. Bychawski

  1961-12-30

  641-708
• Numerical analysis of the effect of torispherical head on the buckling of pressure vessel

  M. R. KHOSHRAVAN, A. RAHMANI

  71–87
• The Influence of High-Strength Bolts Stiffening on Flange Connection Behaviour

  Izabela MAJOR, Maciej MAJOR, Krzysztof KULIŃSKI

  2019-04-05

  199–211
• Comparison of Some Numerical Integration Methods for The Equations of Motion of Systems with a Finite Number of Degrees of Freedom

  Z. Kacprzyk, T. Lewiński

  1983-03-30

  213-240
• Numerical Analysis of Beams and Frames with Strain-Softening Materials

  T. Łodygowski

  1988-10-01

  471-486
• Comparison Between Numerical Analysis and Actual Results for a Pull-Out Test

  Jakub GONTARZ, Jerzy PODGÓRSKI, Józef JONAK, Marek KALITA, Michał SIEGMUND

  2019-09-03

  311–331
• Stability of an Innovative Cold-Formed GEB Section

  Agnieszka ŁUKOWICZ, Marcin KRAJEWSKI

  2017-03-20

  45–51
• Liniowe Tłumienie Nieliniowej Amortyzacji Pojedynczego Impulsu

  J. Skowroński

  1958-03-30

  121-141
• Numerical Analysis of Compatible Finite Elements of Different Order in Two-Dimensional Problems of Elasticity

  F. Braga, G. Rega, F. Vestroni

  1978-12-30

  619-643
• Numerical Analysis of Thermo-Elasto-Plastic Problems

  M. Kleiber, T. Niezgoda

  1988-12-31

  645-660
• Interactive Elastic Buckling of Thin-Walled Open Orthotropic Beam-Columns

  M. Królak, Z. Kołakowski

  1995-12-31

  591-602
• Cracking Characteristics of Different Crack Forms in Pavement under Moving Load

  Guannan YAN

  2024-03-07

  61–79
• Application of Discrete Wavelet Transformation to Defect Detection in Truss Structures with Rigidly Connected Bars

  Anna KNITTER-PIĄTKOWSKA, Michał Jan GUMINIAK, Maciej PRZYCHODZKI

  2016-02-24

  157–170
• Microvoids Evolution in S235JR Steel Subjected to Multi-Axial Stress State

  Paweł Grzegorz KOSSAKOWSKI, Wiesław TRAMPCZYNSKI

  287–314
• Stability and Ultimate Load of Three-Layered Plates – A Parametric Study

  R. Grądzki, K. Kowal-Michalska

  2003-12-30

  445–459
• Naprężenia Momentowe w Tarczy Kołowej

  C. Usidus

  1973-03-30

  175-190
• Strength Analysis of Typical Koepe Pulley Constructions Applied in Mine Hoisting Installations

  Stanisław WOLNY, Bogusław ŁADECKI

  2017-08-10

  523–538
• Temperature Influence on Non-Linear Harmonic Vibrations of Plates Made of Viscoelastic Materials

  Przemysław LITEWKA, Roman LEWANDOWSKI

  2020-03-26

  159–176
• A New Method of Finding Approximate Solutions of the Heat Conduction Equation

  Z. Turek

  1996-07-31

  295-301
• Niektóre Zagadnienia Wytrzymałości Tarczy Nieograniczonej z Ośrodkiem Sztywnym

  H. Czudek

  1960-09-29

  603-625
• Numerical Analysis of the Damage Evolution in a Composite Pipe Joint Under Cyclic Static Axial Tension

  Ł. Figiel, M. Kamiński

  2003-12-30

  363–379
• Analiza Pewnej Klasy Płaskich Dwuwarstwowych Kratownic

  J.B. Obrębski

  1972-03-30

  129–150
• Restrained Flexure of Brittle-Matrix Composite Structures

  M. Janas, J. Sokół-Supel

  117–134
• Damage Identification by the Static Virtual Distortion Method

  P. Kołakowski

  253–270
• Analysis of Thin-Walled Bars With Open and Closed-Open Cross-Sections

  A. Garstecki, W. Kąkol, K. Rzeszut

  345–355
• Universal Algorithm for Generation of Matrices Used in Dynamics of Circular Thimoshenko Segments

  B. Olszowski

  1992-07-01

  213-228
• Analiza stateczności promieniowo ściskanych powłok walcowych metodą uogólnionych szeregów potęgowych

  Michał ŻYCZKOWSKI

  1966-03-30

  157–174
• Analysis and Optimization of Radiant Cooling Panel with Wave-Type Embedded Pipes

  Ramprasad PRASANNA, Prakash MOORTHY, Aravind KRISHNAN, Venkatesh BALAKRISHNAN

  2020-01-02

  47–67
• Influence of Bone Anisotropy on Stress Distribution and Optimum Shape of Cementless Femoral Implants

  P. Kowalczyk

  195–214
• Another Six-Node Triangular Element for Structural Analysis

  Lan HOANG THAT TON

  2022-08-01

  221–238
• Selected Topics of High Speed Machining Analysis - Initial lecture for VIII International Conference HIGH SPEED MACHINING

  Tomasz ŁODYGOWSKI, Alexis RUSINEK, Tomasz JANKOWIAK, Wojciech SUMELKA

  69–96
• Comparative Assessment of Commonly Used Concrete Damage Plasticity Material Parameters

  Hasan AL-RIFAIE, Darbaz MOHAMMED

  2022-06-15

  157-181
• Composite Sandwich Footbridge – Numerical ESL FEM Calculations vs. In Situ Measurements

  Mikołaj MIŚKIEWICZ, Jacek CHRÓŚCIELEWSKI, Bartosz SOBCZYK, Łukasz PYRZOWSKI

  2017-03-20

  77–82
• Numerical Interpretations of Creep Buckling Behavior 
of Columns

  J. Walczak, J. Zacharzewski

  1982-03-30

  3-19
• Numerical Evaluation of Delamination on Mode II in Glass Fiber Reinforced Composites

  M.R. KHOSHRAVAN, M. MONIR VAGHEFI

  55–-68
• Stan Graniczny Rury Grubościennej przy Jednoczesnym Skręcaniu, Rozciąganiu i Różnicy Ciśnień

  J. Skrzypek, M. Życzkowski

  1965-06-30

  281-296
• Issues of Thin-Walled Sigma Beams Strengthened by CFRP Tape in the Context of Experimental and Numerical Studies

  Katarzyna RZESZUT, Ilona SZEWCZAK, Patryk RÓŻYŁO

  2018-03-12

  79–91
• Weakened Zones in Wood – Based Composite Beams and Their Strengthening by CFRP: Experimental, Theoretical, and Numerical Analysis

  Krzysztof KULA, Tomasz SOCHA, Arkadiusz DENISIEWICZ

  2019-07-12

  461–474
• Direct Stiffness Energy Model for a One-Dimensional Complex System

  M.N. Ichchou, L. Jezequel

  485–510
• Modelling and Simulation of Filtration in the Development of Water Treatment Technologies

  K. Wojciechowska

  323–357
• Algorithms of the Method of Statically Admissible Discontinuous Stress Fields (SADSF) – Part II: The Algorithms for Solving Limit Stress Fields Around Isolated Nodes of Stress Discontinuity Lines

  W. Bodaszewski

  231–252
• Modelling and Numerical Analysis of Explosion Under the Wheel of Light Armoured Military Vehicle

  Marek ŚWIERCZEWSKI, Grzegorz SŁAWIŃSKI

  2017-12-20

  587–599
• Numerical Modelling of Laboratory Test of Plain Concrete Under Uniaxial Impact Compression

  R. Adamczyk, T. Łodygowski

  2003-12-30

  381–398
• Interactive Elastic Buckling of Thin-Walled Closed Orthotropic Beam-Columns

  Z. Kołakowski, M. Królak

  1995-12-31

  571-590
• A Fuzzy-Set Approach to Buckling Analysis of Composite Structures

  Piotr Zenon Kędziora

  2006-03-15

  71--84
• Ruch liniowego układu dynamicznego po losowo nierównej belce na sprężystym podłożu

  Andrzej CHUDZIKIEWICZ

  1971-09-30

  381–388
• New Interpolation Functions in Eigen-Frequency Analysis of Timoshenko Beams on Two-Parameter Elastic Soil

  M. C. Bruno, V. Di Capua, C. Franciosi

  1996-07-31

  283-294
• Effects of Body Force on the Pulsating Blood Flow in Arteries

  K. Haldar, S.N. Ghosh

  1993-07-01

  157-166
• Identification of Johnson-Cook Equation Constants using Finite Element Method

  Michał GRĄZKA, Jacek JANISZEWSKI

  215–223
• Geometrically Nonlinear Analysis of Functionally Graded Shells Based on 2-D Cosserat Constitutive Model

  Karol DASZKIEWICZ, Jacek CHRÓŚCIELEWSKI, Wojciech WITKOWSKI

  2014-11-06

  109-130
• Multiobjective Optimization in Two-scale Thermoelastic Problems for Porous Solids

  Adam DŁUGOSZ, Tomasz SCHLIETER

  2016-11-25

  449–456
• O zanikaniu drgań swobodnych w pewnym układzie mechanicznym z nieliniową wibroizolacją

  Władysław ŁAŃCZAK

  1970-03-30

  55–62
• Identification of Thermo-Mechanical Properties of Natural Polymers with a Hybrid Method

  Krzysztof TALAŚKA, Ireneusz MALUJDA

  2016-12-15

  635–641
• Stability of an Imperfect Truss Loaded by Wind

  Marcin KRAJEWSKI, Piotr IWICKI

  2016-12-01

  509–516
• Experimental and Computer Analyses of Impact Penetration of a Steel Rod into Heavy Plates Of Steel and Aluminum Alloys

  L. Kruszka, G.V. Stepanov, V.V. Kharchenko, V.I. Zubov

  217–230
• Computer Analysis of Damage Development in Rectangular Plates

  J. Białkiewicz, P. Mika

  1995-07-01

  71-82
• Analiza Stateczności Zamkniętej Ortotropowej Powłoki Walcowej pod Działaniem Ciśnienia Hydrostatycznego

  Z. Nowak

  1965-03-30

  67-93
• Prestressing for Reduction of Local Vibrations in a Rotorcraft

  Grzegorz SUWAŁA, Lech KNAP, Jan HOLNICKI-SZULC

  2016-08-16

  367-380
• Analysis of Dynamic Interaction Between the Continuous String and Moving Oscillator

  R. Bogacz, T. Szolc

  1993-12-31

  361-380
• Zastosowanie metody różnic skończonych do zagadnień pełzania kołowo cylindrycznych powłok

  Sumio Marakami

  1970-12-30

  631-674
• Modeling of the Influence of Elevated Temperature on Oxygen Distribution in Soft Tissue

  Marek JASIŃSKI, Maria ZADOŃ

  2023-05-09

  287–306
• A Note on the Perturbation Approach to Nonlinear Static Analysis of Elastic Plane Trusses

  M. Saran, M. Kleiber

  1984-09-30

  315-327
• Physically and Geometrically Nonlinear Analysis of Structures Using One- and Two-Dimensional Finite Elements

  K. Dems, M. Kleiber

  1976-12-30

  771-786
• Plasticity of Crystals with Interacting Slip Systems

  W. Gambin

  1991-12-31

  303-324
• Modelling Thermomechanical Response of a Diamond Particle in a Metallic Matrix

  Jan LACHOWSKI, Joanna BOROWIECKA-JAMROZEK

  2017-03-20

  105–112
• Multiscale Identification of Parameters of Inhomogeneous Materials by Means of Global Optimization Methods

  Witold BELUCH, Marcin HATŁAS

  2017-03-20

  19–24
• Dynamics of the Complex System With Elastic and Visco-Elastic Inertial Interlayers

  K. CABANSKA-PŁACZKIEWICZ

  317–333
• Stresses in Viscoelastic Sphere Dried Convectively

  J. Banaszak, S.J. Kowalski

  25–42
• Heat and mass transfer in MHD flow by natural convection from a permeable surface with heat generation effects

  M. M. ABDELKHALEK

  325–344
• Obliczanie Skończonych Sprężysto-Plastycznych Ugięć Prętów Słabo Zakrzywionych

  M. Radwańska

  1972-12-30

  479–496
• 2D Numerical Analysis of an H-Darrieus Hydrokinetic Turbine with Passive Improvement Mechanisms

  Angie Judith GUEVARA MUÑOZ, Diego Andres HINCAPIE ZULUAGA, Jorge Andres SIERRA DEL RÍO, Ramon Fernando COLMENARES QUINTERO, Edwar TORRES LOPEZ, Miguel Angel RODRIGUEZ CABAL

  2023-11-09

  553–569
• Analyses of Plane Stress Discontinuity Lines Systems in Oyane Porous Media

  W. Bodaszewski

  397–414
• Interaction of Membrane and Bending Forces in Plates at Nonlinear Vibration

  W. Dornowski

  1994-07-01

  33-59
• The Fast Crack Growth Analysis Under Dynamic Loading with the Help of Adina

  L.V. Rokach, A. Neimitz

  1994-12-31

  339-358
• On Discrete-Continuous Modelling of the Railway Bogie and the Track for the Medium Frequency Dynamic Analysis

  T. Szolc

  153–198
• Non-Unique Numerical Solutions in Visco-Plasticity

  H.J. Antúnez

  1992-12-31

  525-536
• Some Results in the Numerical Analysis of Structural Instabilities Part II. Dynamics

  M. Kleiber

  1982-12-30

  355-367
• Numerical Elastoplastic Analysis of Trabeculae in Lumbar Vertebral Body

  Algirdas MAKNICKAS, Vidmantas ALEKNA, Oleg ARDATOV, Natalya KIZILOVA, Marija TAMULAITIENĖ, Rimantas KAČIANAUSKAS

  2017-03-20

  83–88
• The Post-Buckling State of a Multilayered Shell in a Form of a Cylinder Sector Subjected to an Unidirectional Compression and Simultaneous Shear

  W. Walczak, N.X. Luu

  1979-03-30

  53-68
• Numerical Investigation of Hurricane-Induced Failure of a Military Tent

  Krzysztof KOSIUCZENKO

  2023-07-04

  367–381
• A study of the Numerical Convergence of Rayleigh-Ritz Method for the Free Vibrations of Cantilever Beam of Variable Cross-Section with Tip Mass

  N.M. Auciello

  1996-12-31

  375-388
• An Experimentally Validated Model for the Ilizarov Fixator Considering the Loss of Wire’s Pretension

  Stavros K. KOURKOULIS, Athanasios MITOUSOUDIS

  2016-12-05

  621–627
• An Investigation of TNT Equivalence of Hemispherical PE4 Charges

  Samuel E. RIGBY, Piotr W. SIELICKI

  2015-01-08

  423–435
• Minimum Weight Design of Trusses Using Heuristic Rules

  M. Pyrz

  1996-12-31

  361-373
• A Numerical Investigation of the Influence of the Material Microstructure on the Failure Mode of Metal Ceramic Composites

  Pitchai PANDI, Gabriella BOLZON

  2016-11-24

  547–553
• Mixed Finite Element Solution of Quasi-Static Problems of Viscoplastic Plates

  M.J. Mikkola, K. Saloviin

  1980-03-30

  139-152
• Numerical Study for Optimal Design of Geosynthetic Reinforced Soil (GRS) Walls

  Rashid Hajivand DASTGERDI, Nima BAHRAMI, Kamran KAZEMI, Muhammad Faisal WAQAR, Agnieszka MALINOWSKA

  2024-01-17

  3–14
• Static and Stability Analysis of Shells with Large Displacements and Finite Rotations

  J. Marcinowski

  373–393
• Problems of Identification of Material Parameters for Different Types of Viscoplastic Constitutive Equations

  P. Kłosowski, K. Woźnica

  135–144
• Statyka i dynamika skręcanego cienkościennego dwuteownika o zmiennym, bisymetrycznym przekroju poprzecznym

  Z. Cywiński

  1969-06-30

  187-217
• The Impact of Temperature Oscillations and Heat Transfer Conditions in Thick-Walled Elbows and Tubes on the Local Stress-Strain Behaviour During the Fast Start-Up of Power Boilers

  Jerzy OKRAJNI, Krzysztof WACŁAWIAK

  2019-12-06

  579–591
• Wyznaczanie Ciężaru Slupów Kratowych Na Podstawie Parametrów Kształtu i Obciążenia

  L. Martini

  1963-06-29

  319-334
• Vibrations of Circular Plate Supported on a Rigid Concentric Ring with Transnational Restraint Boundary

  Lokavarapu Bhaskara RAO, Chellapilla Kameswara RAO

  2016-06-27

  259-269
• The Investigation of the Influence of a Local Elastic Nonlinearity on Vibrations of Plane Truss Members

  A. Pielorz

  3–24
• Algorithms of the Method of Statically Admissible Discontinuous Stress Fields (SADSF) — Part III

  W. BODASZEWSKI

  15–30
• A Class of Rigid Annular Disc Inclusion Problems Involving Translations and Rotations

  B. Rogowski

  1986-12-30

  419-443
• A Computational Analysis of Different Geometric Ratios at the Input of a Secondary Fluid that Affects the Efficiency of a Subsonic Air-Air Ejector

  Jhon Fredy HINCAPIE-MONTOYA, Jorge Andres SIERRA-DEL-RIO, Edwar Andres TORRES-LOPEZ, Diego Andres HINCAPIE-ZULUAGA

  2021-08-26

  257–269
• A Novel Heuristic Algorithm for Minimum Compliance Topology Optimization

  Bogdan BOCHENEK, Monika MAZUR

  2016-11-28

  541–546
• Transport Equation for Shock Strenght in Hyperelastic Rods

  S. Kosiński

  1995-07-01

  205-224
• Nonlinear Bending of Symmetrically Laminated and Homogeneous Anisotropic Plates

  M.K. Prabhakara, C.Y. Chia

  1977-12-30

  559-570
• Równania Macierzowe Tarczownicy Pryzmatycznej

  J. Poplewska, K. Wrześniowski

  1972-03-30

  53–82
• Influence of Polymer Flexible Joint on Concrete Beams in Three-Point Bending Test

  Łukasz ZDANOWICZ, Arkadiusz KWIECIEŃ

  2015-09-30

  397-406
• Finite Timoshenko-Type Beam Element with a Crack

  M. Krawczuk

  1992-07-01

  229-248
• Układ tarczowo-prętowy poddany działaniu sił masowych

  R. Świtka

  1968-09-30

  319-344
• Stateczność podwójnie zakrzywionych powłok kompozytowych

  Aleksander MUC

  1990-12-28

  567–590
• Zastosowanie metody perturbacji do analizy plastycznego płynięcia ośrodka typu Coulomba w stanie osiowej symetrii

  Ryszard IZBICKI

  1970-03-30

  71–99
• Ogólna Teoria Stateczności Prętów Cienkościennych z Uwzględnieniem Odkształcalności Przekroju Poprzecznego. Cześć I. Pręty O Prostym Przekroju Poprzecznym

  A. Chudzikiewicz

  1960-09-29

  423-461
• Unsteady Flow Patterns between Two Egg-Carton Corrugated Plates

  Benjamin GIRÓN-PALOMARES, Abel HERNÁNDEZ-GUERRERO, Ricardo ROMERO-MÉNDEZ, Qiang HE

  2021-05-10

  167–193
• Nonlinear Finite Element Analysis of Bone-Cement Interface Condition in Cemented Total Hip Replacement

  P. Colombi, L. Sgambi

  99–115
• Wpływ Ujemnej Krzywizny Wykresu σ = σ(ε) na Parametry Fali Naprężenia w Gruncie

  E. Włodarczyk

  1971-12-30

  613–628
• Wpływ Warunków Początkowych na Drgania Swobodne Pręta Zamocowanego Nieliniowo

  C. Cempel

  1969-03-30

  101-108
• Drgania Swobodne Układu z Nieliniowa Bezwładnością

  R. Gryboś

  1965-03-30

  213-232
• Plastic Behaviour of Fibre-Reinforced Composites and Fracture Effects

  K. Herrmann, I.M. Mihovsky

  1983-06-30

  165-177
• Interaction Hypersurfaces Applied to Estimate the Load-Carrying Capacity of Space Trusses

  J.A. König, J.A. Karczewski, J. Czarnecki

  1988-07-01

  207-215
• Resistance of Rc Annular Cross-Sections With Openings Subjected to Axial Force and Bending

  M. LECHMAN

  43–64
• A Multi-Layered Ring Under Parabolic Pressure

  Christos F. MARKIDES, Ermioni D. PASIOU, Stavros K. KOURKOULIS

  2016-11-24

  433–440
• Wpływ Długości Rozciąganych Osiowo Prętów Stalowych na ich Wytrzymałość

  P. Jastrzębski

  1961-12-30

  537-574
• Finite Element Analysis of Heat Flow in Friction Welding

  M. Kleiber, A. Służalec

  1984-03-30

  107-113
• Nonlinear Flexural and Torsional Vibrations of Axially Moving Orthotropic Web

  K. Marynowski, Z. Kołakowski

  221–231
• The Shakedown of Circular Arches for Movable Loads

  C. Cichoń

  1975-12-30

  641-656
• Statyka Mostu o Przekroju Otwartym w Łuku

  P. Wilde

  1957-03-30

  15-32
• Structural Behavior of Sandwich Panels with External Deep-Profiled and Internal Soft Facing

  Zbigniew POZORSKI, Rafał SÓL, Jacek SZAJDA, Jolanta BŁASZCZUK

  2013-09-19

  173–184
• Kinematic Approach to Dynamic Contact Problems - The Geometrical Soft Way Method

  C. Bohatier, Cz. Bajer

  1995-07-01

  101-111
• Nieliniowe Zagadnienie Stateczności Sprężystej Trójwarstwowej Otwartej Powłoki Walcowej

  W. Szyc

  1971-12-30

  565–583
• O pewnym zagadnieniu rozkładów temperatury przy stochastycznych źródłach ciepła w pręcie

  T. Chmielniak, E. Czogala

  1969-03-30

  47-56
• Impact of a Cylinder Against a Rigid Target. Part II. Initial Condition.

  A. Nowińska, W. Kosiński

  1996-12-31

  433-443
• The Choise of Feedback Gains in the Computer Model-Based Control Systems of the Direct-Drive Manipulator

  Z. Kowalska

  1994-07-01

  3-18
• Bending of Fragmented Architraves Restored With Bolted Titanium Bars: a Numerical Analysis

  S. K. KOURKOULIS, E. GANNIARI-PAPAGEORGIOU

  159–180
• The Problem of Bending of Fibre Composite Viscoelastic Plates

  M. Olejniczak

  1995-12-31

  505-526
• Large Displacements in Tire Inflation Problem

  J. Pelc

  1992-03-31

  103-113
• Isogeometric Approximation for Dynamics of Infinite String Using Difference Equation Method

  Jerzy RAKOWSKI, Przemyslaw WIELENTEJCZYK

  2016-02-24

  197–211
• Pewne zagadnienie nieograniczonej płyty na podłożu nieliniowo-sprężystym

  M. Niemiec, G. Szefer

  1968-06-30

  261-277
• Numerical Analysis of the Transient and Non-Isothermal Channel Flow of a Third-Grade Fluid with Convective Cooling

  Tiri CHINYOKA, Oluwole Daniel MAKINDE

  2020-07-20

  335–351
• Pewne rozwiązanie szczególne dla wstępnie sprężonej powłoki tekstylnej

  M. Wizmur

  1969-03-30

  3-21
• Multi-Scale Numerical Analysis of the Effect of Microstructural Features on the Mechanical Behavior of Polycrystalline Ti-6Al-4V Alloy

  Fatna BENMESSAOUD, Vincent VELAY, Mohammed CHEIKH, Vanessa VIDAL, Christine BOHER, Farhad RÉZAÏ-ARIA

  2019-06-28

  227–242
• Algorithms of the Method of Statically Admissible Discontinuous Stress Fields (SADSF) — Part IV: Integration of Fields Around Nodes into Planar Complex Fields

  W. BODASZEWSKI

  119–-131
• A Simple Single Specimen Method for Measuring the Fracture Surface Energy of Rubber Materials

  N. Ait Hocine, M. Na1t Abdelaziz

  29–45
• Współdziałanie Sprężysto-Plastycznych Fal Naprężenia z Nieściśliwą Płaską Przegrodą Spoczywającą na Półprzestrzeni Sprężystej

  A. Papliński, E. Włodarczyk

  1972-06-30

  253–268
• Drgania Ram Przestrzennych z Elementów Cienkościennych o Profilu Otwartym

  J. Rutecki

  1959-03-30

  95-142
• Cross-diffusion Effects on MHD Mixed Convection over a Stretching Surface in a Porous Medium with Chemical Reaction and Convective Condition

  Marimuthu BHUVANESWARI, Sheniyappan ESWARAMOORTHI, Sivasankaran SIVASANKARAN, Ahmed Kadhim HUSSEIN

  2019-03-07

  3–19
• On the Static Nature of Minimal Kinematic Boundary Conditions for Computational Homogenisation

  Marek WOJCIECHOWSKI, Marek LEFIK

  2016-11-25

  581–587
• On the Problem of Bending of Transversally Isotropic Plates

  V. Bozhydarnyk

  61–71
• Creep Effects in the Finite Element Analysis of Thermo-Mechanical Problems

  T. Niezgoda

  1992-10-01

  375-386
• Stateczność Otwartej Trójwarstwowej Powłoki Walcowej Dynamicznie Ściskanej

  W. Szyc

  1972-12-30

  539–553
• Oszacowanie Energii Dysypowanej w Procesie Deformacji Plastycznej Niektórych Metali

  J. Klepaczko

  1967-06-30

  185-195
• Obliczanie Naprężeń w Pewnym Typie Lupiny Walcowej Otwartej Poddanej Działaniu Sil Odśrodkowych

  S. Borkowski

  1962-09-29

  461-496
• Finite Deformation of Nonlinearly Elastic Ring

  T. Wegner, K. Magnucki, P. Wasilewicz

  1987-12-31

  695-704
• Free Vibrations of a Tapered Cantilever Beam With Eccentrically Concentrated Masses and Intermediate Supports

  N.M. Auciello, P.M. Bellès, C.P. Filipich

  1997-07-01

  237-250
• Zagadnienia termosprężystości w obszarach ograniczonych powierzchniami kulistymi i stożkowymi

  Z.F. Baczyński

  1968-03-30

  33-67
• Evaluation of Steel Clad Plate Weldability Using Ram Tensile Test Method

  Z. ZATORSKI

  229–238
• Analytical Modeling of I-beam as a Sandwich Structure

  Krzysztof MAGNUCKI, Jerzy LEWIŃSKI

  2018-08-09

  357–373
• Natural Frequencies of a Cantilever Timoshenko Beam With a Tip Mass

  N.M Auciello

  1995-07-01

  19-26
• Ruszt o sześciokątnej siatce prętów

  Witold GUTKOWSKI, Jan OBRĘBSKI

  1971-09-30

  423–445